Whether you are a woodworking enthusiast, serious builder or weekend project warrior, you are bound to feel the requirement of a nail gun while undertaking your routine work.
Today we are going to discuss about the three most important types of nail guns so that you can align your purchase decision with your ultimate goals.
Pneumatic Nail Gun
Compressed air powers up these nail guns to the core. It can be used after being connected to a compressor and air hose.
The compressed air drives down the hammer over the nails at the barrel.
Before releasing the compressed air, you will have to surpass a safety mechanism which helps in buffering users from all chances of accidents.
The trigger valve mechanism is used by the pneumatic nail guns for powering. The compressed air is blocked from entering into the chamber by the valve.
The nail gun does not fire unless you press the plunger onto the surface area you wish to nail.
The valve is released whenever the trigger is pulled to allow the passage of compressed air inside the chamber.
Another plunger is present there along with a hammer which is attached with a blade.
You will have to press down the plunger onto your material before the compressed air reaches the hammer.
On doing the same, the plunger is lifted up by the compressed air which ultimately acts on the hammer.
The force created by the compressed air is adequate to drive down the hammer for firing the nail through the barrel into your material.
The blade attached to the hammer can separate the fired nail from others on the nail strip once the hammer is forced down.
You can thus be guaranteed about firing just one nail with each single shot.
Combustion Powered Nail Guns
These nailers depends on internal combustion for driving the hammer by creating adequate pressure.
These types of nail guns have a combustion chamber in the place of a plunger above the hammer.
A canister supplies the combustion chamber with gas and a battery provides momentary electric spark for creating combustion within the chamber.
Alternatively, you can connect this nailer to an external power outlet.
A combustion takes place inside the chamber every time you pull the trigger and release an electric spark.
The pressure above the hammer increases in sync with the amount of combustion which ultimately drives down the nail into the material.
The blade attached to the hammer ensures that just one nail gets fired with a single shot.
Electric Powered Nail Guns
This type of nail gun features a simple design and utilizes a powerful spring in the place of high-pressure compressed air or explosive combustion force for driving in the nail.
The lightweight structure of an electric gun wont inflict much pressure on your hands while being used over long stretches of time.
However, they cannot match up to combustion powered or pneumatic nail guns in the department of power and are thus limited to undertaking lighter projects like securing trimmings.
Although the market is filled with various types of nail guns, each specialized in a particular type of work, all of them provide similar end result of driving the nail into your desired surface.